Process and timing
From the measuring visit to the final walk-through, a window project follows a predictable order. These articles explain each step, what can delay it, and what to check before the installer leaves.
- When to Replace Windows: Weather, Sealants, Schedules
Windows can be replaced in any season. What sealant, foam and flashing tape temperature limits say, and how lead times and installer schedules shift the timing.
- How to Prepare for Window Installation Day
How to prepare for window installation: clearing space, blinds, alarms and pets, lead-safe steps in older homes, the day itself and the walkthrough.
- Lead Paint and Window Replacement: The EPA RRP Rule
What EPA's Renovation, Repair and Painting rule requires when windows are replaced in a pre-1978 home, the Renovate Right pamphlet and lead-safe work practices.
- Replacing Windows and Doors Together: Quotes and Timing
When it makes sense to replace patio or entry doors along with your windows, how door quotes and lead times differ, and the ENERGY STAR criteria for doors.
- Skylight Replacement: Who Does It, Flashing and Cost
Replacing a skylight alongside a window project, who does the roof work, why the flashing kit matters, ENERGY STAR skylight numbers and when it is a roofing job.
- How Long Does Window Replacement Take? Lead Times
The steps from measure visit to finished install, one San Diego distributor's dated factory lead times by window line, install time per window, and what adds time.
- Egress Window Requirements: Size, Sill, Well and Ladder
The egress window rules in Section R310 of the residential code, as two building departments reproduce them, and why your locally adopted edition is the one that counts.
- How Are Replacement Windows Installed? Step by Step
How replacement windows go in, from removal to shims, foam, flashing and trim, as DOE and a manufacturer's guide describe it, and what to check on the day.
- How to Measure for Replacement Windows
How installers measure for replacement windows, width and height at three points, depth and squareness, why the smallest number wins, and what you can check yourself.
- New Construction vs Replacement Windows
The difference between nail-fin new construction windows and replacement windows, when each is used in an existing home, and how their costs compare.
- Mobile Home Window Replacement: What Is Different
Why manufactured-home windows differ from house windows, how they mount, what to measure before ordering, and what the HUD code in 24 CFR 3280 says about windows.
- Retrofit Windows in Stucco and Brick Homes
How flush-fin retrofit and block-frame windows go into stucco and brick walls, why Western stucco homes use them, and what to ask about sealing.
- Do You Need a Permit to Replace Windows? It Depends on Your City
Whether a window replacement needs a permit is set by your city or county. Three real city rules side by side, and the changes that usually bring a permit in.
- Full-Frame vs. Insert Window Replacement: Which Does Your Home Need?
Insert (retrofit) windows fit inside the old frame; full-frame replacement goes back to the rough opening. When the frame must go, and the price gap as surveys report it.
Other topics
FindAWindowPro is a lead-generation service, not a contractor, installer or manufacturer. The articles are general information, not legal or financial advice. We are not affiliated with the manufacturers named.